AVK KNIFE GATE VALVE, PN10
Quick operation lever, frontal packing
Contact
AVK Valves Company Hong Kong Ltd.
Unit 01-02, 21/F, Pilkem Commercial Centre, 8 Pilkem Street, Jordan, Kowloon Hong Kong
Knife gate valve with quick operation lever for wastewater treatment 0°C to +80°C
AVK lug/wafer knife gate valves are bi-directional with full and plane bore. The protected sealings and high quality materials bring about a great performance and a long service life. AVK knife gate valves are available with lever, non-rising stem and handwheel, rising stem and handwheel, pneumatic actuator, ISO top flange for actuator or complete with electric actuator.
| Variant 702/00-105 | |
|---|---|
| Connection: | Flanged |
| Material: | Cast Iron |
| DN: | DN125 - DN150 |
| PN: | PN 10 |
Features
- The valve is self cleaning as particles will be pushed off the gate when opening the valve. For extra protection of the packing gland a scraper is available as an optional extra.
- Bi-directional, can be installed independent of the flow direction
- Full bore with no reduction of the flow
- Plane bottom prevents sediment from being accumulated
- No cavity in the body and thus no risk of clogging
- U-shaped one-piece EPDM sealing between the body parts makes up for tolerances in coating and casting. It is reinforced with a steel insert to protect it from being damaged during operation.
- Encaged stem with yokes prepared for mounting of micro switches and inductive censors
- Stem and gate connection is secured with self-locking nuts
- Supports integrated in the body casting protect the gate from deflecting under pressure
- Body of ductile iron with 100-150 μm UV resistant polyester coating, RAL 5017. Optionally of acid-resistant stainless steel or duplex
-
Yokes of carbon steel with coating 100-150 μm of plascoat PPA 571 Aqua
- Gate, stem, bolts and nuts of acid-resistant stainless steel
- Washers under the bolts protect the coating
- Slim design and low weight
- Approved according to the 2014/68/UE Pressure Equipment Directive
- Approved according to the 2014/34/EU ATEX Directive
- Available in larger dimensions
- Optionally in higher PN class
Downloads
Datasheet
Installation, operation and maintenance manuals
Reference nos. and dimensions:
Scroll for more info
| Reference no. | DN mm |
Flange drilling |
L mm |
H3 mm |
W mm |
W1 mm |
H closed mm |
H open mm |
Test pressure bar |
Work press. bar |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 702-0125-00-0000041 | 125 | PN10 | 56 | 1013 | 188 | 769 | 500 | 892 | 4.5 | 3 | 22 |
| 702-0150-00-0000044 | 150 | PN10 | 56 | 1251 | 233 | 964 | 590 | 1117 | 4.5 | 3 | 29 |
2D/3D drawings
Enquiry
Scroll for more info
Components
| 1. | Plate | Carbon steel |
| 2. | Stem | Stainless steel AISI 316 |
| 3. | Bolt/nut | Stainless steel A4 |
| 4. | Top packing gland | Ductile iron GJS-400-15 |
| 5. | Bolt | Stainless steel A4 |
| 6. | Packing | EPDM rubber |
| 7. | Body | Ductile iron GJS-400-15 |
| 8. | Gate | Stainless steel AISI 316 |
| 9. | U-shaped seal | Steel / EPDM |
| 10. | Bolt | Stainless steel A4 |
| 11. | Lever | Carbon steel |
| 12. | Guide | Carbon steel |
| 13. | Drag link | Carbon steel |
| 14. | Lever bracket | Carbon steel |
| 15. | Lock | Steel |
Standards
- Face-to-face dimension according to EN 558, Series 20
- Flange drilling to EN1092, PN10/16